Tuesday, May 19, 2015

Back from VFW pinball

Had an awesome weekend.  Above and beyond the 9 hours me and my wife spent at Clay's (which was amazing), we also visited Marvin's Marvelous Mechanical museum, and an arcade called "the arcade".  Clay's was simply amazing, and I did shake his hand and thank him for everything he's done.  Ok, so he's got 200 pinballs, and when I say that I mean all 200 working.  Everything from early woodrails, to solid state, to modern DMD.  Rare titles, common titles.  He's got 2 bowlers, a shooting gallery EM, a pitch and bat.  Williams, gottlieb, Stern, data east, zaccaria, a couple oddball spanish pins.  Even when pins went down, he had a staff of well over a dozen techs jumping on issues to keep them running.  Because of the limited ticket sales, it kept the crowd to a minimum.  Marvin's had absolutely horribly taken care of pins, and I posted a message on pinside to Mipinball to let them know.  I was immediately tagged as a troll, but it soon turned back my way when another local admitted the pins were getting pretty bad, and the router admitted he needed to get in there after I posted photos of how bad they were.  "the arcade" was pretty neat, reminded me a lot of "Flynn's arcade" in tron.  Lower level, and then a balcony with more games instead of an office, and lots of ceiling fans.  The only thing missing was some good music playing and some neon.

So what did I learn from all of this?  Well actually 2 things:
1. Sometimes pinball is about slight of hand (magic if you will).  Being that there were many titles with lower playfields, I really thought about my design.  Now since I haven't actually looked underneath the playfield of any pinball title with a lower level, I can't be sure how it works.  Though I'm pretty sure on old gottliebs like haunted house and black hole they really did drop the ball from the upper playfield to the lower one, then sent it back up via a VUK.  What I'm getting at is that I'm thinking I don't really need to do this (since I have one ball).  I mean I'm not dealing with silver and white powerballs like twilight zone, why would I bother transferring the ball and deal with hangups, and spend the time on building subway systems?  So what I'm going to do is create the illusion that the ball went from the ball trough down to the lower level, then back up to the trough.  When the ball drains, the switch will let the system know it drained, and it will activate a VUK scoop in the lower playfield to pop the ball waiting down there into play.  When it drains, it sits in the VUK (activating the next switch to tell the trough solenoid to pop the ball sitting in the trough into the shooter lane).  From a player's perspective, they have no idea what's going on under the curtain.  From my perspective, I keep things simple.
2. My shooter lane isn't consistent, but it can be.  I played a few titles with a similar shooter lane as mine.  Some worked 1/4 of the time, like 4 million BC:
http://www.ipdb.org/machine.cgi?id=935

Now maybe this was meant to work, but the shooter lane spring wasn't as strong as it's supposed to be?  So then I played a Williams early solid state (can't remember the title, but it was around the time of Flash with a similar layout).  Much like flash, it was as if the ball was told where to go because hard or light shots, the ball always wanted to follow the path it was supposed to

In order to make my layout flow well, this is the last thing I really have to improve, so I'm going to take a cue from williams and try to get my walls closer to this layout to ensure the ball travels around the orbit.

I started working on a cardboard boat for the lower playfield to sort of lay things out but it's too early to post photos just yet.  I might post a video later this week.

Friday, May 8, 2015

Good layout update - 5.8.15

Beyond getting my loop-da-loop ramp working decently, I had to redo the left side and move the incoming VUK entrance to the right.  I still think the wall needs some work (perhaps open up the VUK on the back too) so you have a better chance of hitting it.  I also had to deal with killing any dead zones early (equivalent of having plastics) so that the ball won't get stuck somewhere.  So far the ball hasn't gotten stuck any where (at least nothing I couldn't lightly shake the machine to get loose) which isn't bad for cardboard walls.
















































Here's a video showing the latest gameplay:

Wednesday, May 6, 2015

what a productive day!

Ok, so it all started with getting a good loop-da-loop ramp made.  I shrunk the diameter from 5" down to 4" (I may not be able to fit the violin neck through anymore).  I still built it from cardboard, but this time I just used thin manilla folder cardboard (easier to form and curve).  But because it's flimsy, I ended up stiffening it by adding ribbing.  Ribbing on the sides, ribbing down the middle, support walls (closing off dead areas).  It works, FINALLY it works (most of the time).  Out with the old, in with the new:



I was so excited that I  rebuilt the VUK, but now have the entrance hole on the right side instead of the back (going from the back at a weird left angle was just too hard to shoot for, especially with a loop right just behind it).  I just continued to fix other walls, and then started really shooting for everything, and I stumbled upon a pretty nice flow (with multiple options for getting to the upper playfield).  Plunging will either go into the orbit shot, or a soft plunge will hit a bank of targets on the left.  You can bounce of the back wall separation (pops to go behind there) to get to the VUK from the lower right flipper, you can shoot directly through the loop-da-loop ramp from the middle right flipper into the VUK, or choose to go up the loop-da-loop ramp for a 2-shot comb.  The middle right flipper will also still shoot up the piano captive ball ramp.  There's also a shot from the lower right flipper into a left side lane target.  The lower left flipper still goes into the spinning record (not shown yet), and if you shoot for the loop-da-loop, you get a neat effect where the ball goes halfway up and pops back onto the playfield (sometimes causing a left outlane drain, that'll teach you to shoot the loop ramp wrong!)  I'm going to get a balcony wall installed on the right side of the upper playfield, clean up a few more walls, and I should be able to shoot a new video showing the current gameplay.



Tuesday, May 5, 2015

cardboard has it's uses, very few

Ok, so I'm finding out that cardboard is really flimsy.  You can make a wall, but if the angle is fairly critical, good luck getting it to keep it's shape for repeatable results.  As for the loop-da-loop ramp, it's really becoming futile.  This has nothing to do with "lining up my shots", no pinball simulator is going to help me because everything is rigid in a simulator.  I really need to start fabricating certain things in real material, whether that be metal strips, round rails, or 3d printing rigid structures (like loop-da-loop ramps).  I really need to take a step back and figure out how I want to continue prototyping my layout and still have the ability to move things around as needed.